VLT® AQUA Drive FC 202VLT® AQUA Drive FC 202
On this page
VLT® AQUA Drive FC 202
Intermittent display

The display is either on or off when it is not supposed to.

Try this solution

If the display stays lit, the problem is in the control wiring. Check the wiring for shorts or incorrect connections

Test:
To rule out a problem in the control wiring,
disconnect all control wiring by removing the
terminal blocks.

Possible cause/s:
Internal voltage supply fault or SMPS is defective

Need more help?

Ask a different questionVLT® AQUA Drive FC 202
Select a different product
© 2023|Sitemap