VLT® AutomationDrive FC 302VLT® AutomationDrive FC 302
On this page
VLT® AutomationDrive FC 302
Intermittent display

The display is either on or off when it is not supposed to.

Try this solution

If the display stays lit, the problem is in the control wiring. Check the wiring for shorts or incorrect connections

To rule out a problem in the control wiring,
disconnect all control wiring by removing the
terminal blocks.

Possible cause/s:
Internal voltage supply fault or SMPS is defective

Need more help?

Ask a different questionVLT® AutomationDrive FC 302
Select a different product
© 2023|Sitemap